Full-Field Ablation

Gentle and Deep Er:YAG Laser Resurfacing

One Approach. Two Depths of Correction.

Aerolase Era Full-Field Ablation delivers controlled skin resurfacing using 2940 nm Er:YAG energy and 300-microsecond pulses. The 10mm Optical Module offers Gentle Ablative Resurfacing across broader areas, while the 6mm Optical Module provides Deep Ablative Resurfacing for targeted correction.

Aerolase Precision Components in Clinical Light

The Renewal Spectrum

Brighten.

10mm Full-Field Optical Module, Gentle Ablative Resurfacing

A controlled, gentle ablation across a 10mm spot that removes dull, uneven surface skin in a fast, full-face pass.

Surface texture and tone

Superficial pigment concerns

Recovery over a few days of visible flaking

Correct.

6mm Full-Field Optical Module, Deep Ablative Resurfacing

A collimated beam in a smaller spot at higher fluence that reaches deeper, precisely where the damage lives.

Established wrinkles and textural damage

Localized correction

Recovery over 3-5 days with some redness and flaking

Gentle Resurfacing

The Broad Pass

The 10mm spot covers approximately 78.5 mm² for broad, efficient coverage. Gentle Resurfacing delivers uniform, edge-to-edge ablation across large treatment areas, making it the workhorse for full-face treatments. Depth is dialed with precision: lighter settings brighten and even tone with minimal recovery, while deeper settings meaningfully correct texture, fine lines, pigmentation, and sun damage. Every full-field protocol starts here. Actual treatment depth depends on settings, passes, and tissue response. 

Clinical Focus:

Superficial laser peels

Gentle full-field resurfacing

Full-face tone, texture, and pigment correction

Patients receiving Aerolase Neo and Era laser treatment

Deep Ablative Resurfacing

The Targeted Pass

The 6mm spot covers approximately 28.3 mm² for smaller-area precision. At the same pulse energy, the smaller spot produces about 2.8 times the energy density. Deep Ablative Resurfacing concentrates the same layer-by-layer ablation into a smaller spot for focal precision: periorbital and perioral lines, discrete scars, individual lesions, and smaller anatomic zones. Used after the Gentle Resurfacing pass on Era Elite, it refines exactly where correction is needed, completing the treatment with per-area detail. Actual treatment depth depends on settings, passes, and tissue response. 
‍
Clinical Focus:

Periorbital and perioral detail

Focal scar revision

Discrete lesions and localized texture

Graphic depicting the 6mm spot size

Full-Field Ablation vs Fractional Resurfacing

Full-Field Ablation

Full-field ablation with the 10mm module removes a shallow, uniform layer across 100% of the treatment area. The surface renews evenly in a single session rather than in stages, which is what makes it the right tool for tone, texture, and surface pigment.

Fractional Resurfacing

Fractional lasers ablate the skin in narrow columns, typically covering 5% to 30% of the treatment surface depending on density settings. The channels reach deep, but the tissue between them is untouched, which is why fractional protocols run as a series.

The broad pass and the targeted pass

Why does spot size matter in full-field laser resurfacing? The 10mm spot covers approximately 78.5 mm² for broad, efficient coverage; the 6mm spot covers approximately 28.3 mm² for smaller-area precision. At the same pulse energy, the smaller spot produces about 2.8 times the energy density. Actual treatment depth depends on settings, passes, and tissue response. 

Full-Field 10mm

Gentle Resurfacing

Full-Field 6mm

Deep Ablative Resurfacing

Full-Field Ablation vs Fractional Resurfacing

Full-Field Ablation

Full-field ablation with the 10mm module removes a shallow, uniform layer across 100% of the treatment area. The surface renews evenly in a single session rather than in stages, which is what makes it the right tool for tone, texture, and surface pigment.

Fractional Resurfacing

Fractional lasers ablate the skin in narrow columns, typically covering 5% to 30% of the treatment surface depending on density settings. The channels reach deep, but the tissue between them is untouched, which is why fractional protocols run as a series.

What Full-Field Ablation Treats

Fine Lines and Wrinkles

Smooths age-related creases and expression lines. The 10mm handles general facial volume; the 6mm addresses deeper perioral and periorbital lines requiring more depth in a smaller area.

Sun Damage and Surface Pigmentation

Clears accumulated photodamage, age spots, and solar lentigines by removing the pigmented superficial layer and driving even renewal.

Acne Scars and Scar Revision

Ice pick, boxcar, and rolling acne scarring, plus surgical and traumatic scar revision. Typically the 6mm, where higher fluence in a focused area is more effective than lighter full-face passes.

Textural Irregularity and Benign Lesions

Evens surface texture, refines pore appearance, and addresses keratoses and other surface lesions.

Ashlee Bunkleman, LE, performing an Aerolase Neo treatment on a white male patient.

What Full-Field Ablation Treats

Fine Lines and Wrinkles

Smooths age-related creases and expression lines. The 10mm handles general facial volume; the 6mm addresses deeper perioral and periorbital lines requiring more depth in a smaller area.

Sun Damage and Surface Pigmentation

Clears accumulated photodamage, age spots, and solar lentigines by removing the pigmented superficial layer and driving even renewal.

Acne Scars and Scar Revision

Ice pick, boxcar, and rolling acne scarring, plus surgical and traumatic scar revision. Typically the 6mm, where higher fluence in a focused area is more effective than lighter full-face passes.

Textural Irregularity and Benign Lesions

Evens surface texture, refines pore appearance, and addresses keratoses and other surface lesions.

Full-Face Resurfacing with the 10mm Lens — Including Skin of Color

Periorbital and Perioral Precision with the 6mm Lens

Results That Inspire Trust

Sun Damage, Fine Lines and Wrinkles
Photos courtesy of
Dr. Ritu Gupta, MD
Acne and Acne Scars
Photos courtesy of
Jason Emer, MD
Traumatic Scar Revision
Photos courtesy of
Dr. William Watfa
Sun Damage
Photos courtesy of
Blossom MedSpa
Aging Skin
Photos courtesy of
Chesahna Kindred, MD, FAAD
Sun Damage & Wrinkles
Photos courtesy of
James Gordon, MD

Technical Specifications

Scroll horizontally to see all.
Parameter Gentle Resurfacing Deep Ablative Resurfacing
Wavelength 2940nm Er:YAG 2940nm Er:YAG
Pulse Duration 300 microseconds 300 microseconds
Delivery Profile Focused · 10mm · full-field Collimated · 6mm precision · full-field
Depth of action Stratum corneum Lower stratum corneum and stratum granulosum
Ablation depth 3 to 14 micrometers 10 to 25 micrometers
Treatment time 10 to 20 minutes, full face 10 to 20 minutes, full face
Downtime 3 to 5 days 5 to 7 days
Cooling None required None required
Consumables None None
Skin Types Fitzpatrick I to VI Fitzpatrick I to VI
Runs on Era Focus, Era Elite Era Elite

Frequently Asked Questions

What is Full-field Ablation?

Full-field ablation is a resurfacing method that removes a uniform layer of tissue across the entire treatment area, in contrast to fractional resurfacing, which ablates narrow columns and leaves the tissue between them untouched. On the Aerolase Era it is delivered as two treatments: Gentle Resurfacing on the 10mm Optical Module and Deep Ablative Resurfacing on the 6mm, both using 2940nm erbium energy at a 300-microsecond pulse and ablating the stratum corneum and superficial epidermis, with reepithelialization within roughly 48 hours.

What is Gentle Resurfacing?

A superficial laser peel is a full-field ablative resurfacing treatment that removes a controlled layer of the epidermis to clear photodamage and trigger renewal. On the Aerolase Era it is delivered through the 10mm Optical Module at 2940nm with a 300-microsecond pulse, ablating 15 to 30 microns across the full treatment area with reepithelialization within roughly 48 hours.

How does a laser peel compare to a chemical peel?

Both remove a controlled layer of epidermis, but the mechanism and the control differ. A chemical peel works by acid concentration, contact time, and skin condition, so depth varies with the patient. A laser peel ablates by measured energy, so depth is set by fluence and pass count and is reproducible from patient to patient. Er:YAG at 300 microseconds also leaves minimal residual thermal damage and requires no neutralization or frosting endpoint.

What is the difference between the 10mm and 6mm Optical Modules?

Spot size, and therefore fluence. A 10mm spot covers 78.5 mm² while a 6mm spot covers 28.3 mm², so the same pulse energy through the smaller aperture lands at roughly 2.8 times the energy density. The 10mm module delivers Gentle Resurfacing, the lighter, higher-volume treatment. The 6mm module delivers Deep Ablative Resurfacing, used for deeper indications in smaller areas.

How long is recovery after Gentle Resurfacing?

Reepithelialization occurs within roughly 48 hours, with most patients returning to normal activities within 3 to 5 days. Because the 300-microsecond pulse leaves minimal residual thermal damage, the prolonged erythema common after CO2 resurfacing is substantially reduced. CO2 resurfacing typically requires 2 to 4 weeks.

Is laser peel treatment safe on darker skin types?

The 10mm Optical Module is indicated across Fitzpatrick I through VI. Traditional ablative lasers carry a high risk of post-inflammatory hyperpigmentation in types IV through VI because longer pulses allow heat to linger in melanin-rich tissue. At 300 microseconds, energy is absorbed by water at the surface and ablation completes faster than heat can spread, which reduces that risk.

Embrace the Next Generation of Skin Rejuvenation.

Era goes beyond expectations—it’s a leap forward in skin care technology. Whether you’re a practitioner aiming to expand your practice or a patient looking for transformative yet gentle treatments, Era brings precision, versatility, and confidence to every session.